Tenda TEF1226P-24-410W Switch 24FE+2GE 1SFP Smart Switch With 24-Port PoE

362.00

Share:

Our Service

Do you have any questions? Just call us.

Description

TEF1226P-24-410W is a smart PoE switch independently designed by Tenda. Featured with 24 IEEE 802.3at/af-compliant RJ45 ports, it supplies a maximum PoE power output of 370 W. The switch can supply power when transmitting data with APs, IP cameras, and IP phones through CAT5 cables . Featured smart management functions, including 250 m long distance power supply, 802.1Q VLAN, link aggregation, QoS and MAC address binding, it minimizes the difficulty and cost in networking deployment.

 

 

Due to smart web management, engineering is so simple.
Tenda Gigabit smart PoE switch TEF1226P-24-410W, with intelligent web network management functions, provides a more intuitive and user-friendly interface.It supports 250 meters long distance power supply, QVLAN, link aggregation, QoS, MAC address binding, etc., which greatly reduces construction difficulty and saves time, maximizing cost savings for engineerings.

GE & SFP Uplink Ports, Large Buffer Of 4M
With one 1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fiber module TEG311SM, the switch supports a maximum transmission distance up to 20km.

6KV Excellent Lightning Protection
The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc., and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC: 100-240V~50/60Hz.

Up to 250 meters long distance transmission under the Extend Mode beyond hundred meters transfer limitation
Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1226P-24-410W can support 250 meters long distance transmission, which can save the cost of your project with less devices used.

370 W PoE Power Supply
The switch features 24 RJ45 ports being compliant with IEEE 802.3af/at standard. The entire switch offers a maximum PoE power output of 370 W, and 30 W for a single port, to supply power to data transmission with 24 PoE-devices such as APs and IP cameras.

Standard&Protocol
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x,IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d, IEEE802.3af/at
LED indicator
24 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
1 * SYS LED
Interface
24 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)
2 * 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 * 1000 Mbps Base-X SFP port (Combo)
Forwarding Rate
6.55 Mpps
Switching Capacity
8.8 Gbps
MAC Address Table
16K
Lightning Protection
≥6KV
Input Voltage
AC: 100-240V~50/60Hz
Power Supply
Ports 1-24 support standard IEEE802.3af/at
30W output per PoE port
370W output of the total PoE Power
Power Consumption
410W output the whole device
Dimension
440*284*44mm
Environment
Operating Temperature: 0℃~45℃ (32℉~113℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
PoE management
Support over temperature protection for PoE module
Support graphical management
detection of PD equipment
VLAN
Supports Port VLAN
Supports 802.1Q VLAN
Security
MAC-Port Binding
Link Aggregation
Static Trunk Supports 3 groups of 4-Port trunk support
STP
STP/RSTP
IGMP Snooping
IGMP (v1/v2) Snooping
Port Mirroring
N: 1 port mirroring
QoS
802.1p and DSCP priority re-marking
Flow control
Flexible queue scheduling algorithm can be set
based on port and queue, support SP, WRR
Firmware Upgrade
Upgrade via the Web
Management and maintenance
Support SNMP v1/v2 and WEB-based management
Certification
CCC、FCC、CE、RoHS

Produkte te ngjashme